XENO PIXEL.png

Xenopixel setup instructions

1  blue flash – change sound too low, high or mute

2  blue flashes – style of blade – rainbow blade, fire blade

3  blue flashes – type of blade ignition

4  blue flashes – sound font selection.

 

While blade is on

Momentary press will enable blaster effect

1  blue flash – enable lock sound effect

2  blue flashes – cycle through all blade colours. Press once more       to set preferred blade colour.

3  blue flashes turn of blade.

 

WARNING! 

CHARGING YOUR SABER

Only use a USB wall charger with the following ratings - 5V 1A and a maximum charging current of 1000mA.

Any wall charger with an output great than this will cause irreversible damage to the charging board.

DO NOT USE FAST CHARGERS

 

STORING YOUR SABER

Always remove the battery if the saber isn’t going to be used for more than 2 weeks.

Any longer than 2 weeks can cause the battery to drain to a level at which it can no longer accept a charge, it could also cause the battery to leak acid inside the battery case. 

 

If the wrong USB charger is used or the battery dies because it’s been left in for more than 2 weeks and can no longer accept a charge these will not be covered by ForceSabers. (Only applies to sales prior 01/09/21)

51A5i7yuzuL._AC_SL1200_.jpg

General Product Information.

All ForceSabers are 100% bespoke custom handmade to order. As this Saber is 100% handmade from scratch there are unavoidably slight cosmetic scratches or imperfections on the handle, rivets and blade. Due to the construction of the blade housing (emitter) there will be heavy scratch on the inside of this area but it will have no effect on the blade or use or look of the saber. The raw materials may also come with imperfections or marks. All switches are manually glued in place, the switch will not come lose but there can be residual glue around the switch edges. When being used these imperfections / points will have no effect or impact on the use of the item.

 

Prior any saber being dispatched the electronics are fully tested. Once the saber has passed the tests the battery case is placed inside the hilt and the black end cap is loosely put in place. When inserting the 4 x AAA's for the first time, remove the black end cap and gently pull the battery case so it is just outside the hilt. DO NOT Aggressively pull the battery case as this will rip the black wire off. Once the batteries have been fitted gently place the battery case inside the hilt and fully push the black end cap all the way into the hilt.

If the individual listing states + SFX this means the model on this listing has sound effects installed. For models without this they will not have sound installed. 

 
 

Li-ion Battery Safety

Use special caution when using Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.

 

Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use.

 

Always charge in/on a fire-proof surface. Never leave charging batteries unattended.

 

Do not modify batteries or chargers in any shape or form.

 

Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board (PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion an/or fire.

 

Store your batteries away from the sun and heat to prevent overheating your batteries.

 

Please be sure to inspect your battery before use to ensure it is not damaged including tears/rips in the battery wrap. Discontinue use immediately if battery is damaged.

 

Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.

WARNING!

Do not use any charger with am output higher than 5 Volts and a maximum charging current of 1000 mA. 

Li-ion battery Information

Product Description

1 x 18650 32600mAh Battery - Flat Top 
This is a genuine Chinese 18650 Li-Ion battery rated at 3.7V 2600mAh.
Generally an excellent quality, reliable Lithium 18650 battery that gives consistently great performance.

Manufacturer's Specs:

Model: 18650 
Rated voltage: 3.6-4.2 V 
Standard capacity: 2600mAh 
Standard charge: 1.25A, 4.2V, CCCV, 100mA deadline 
Quick charge: 4A, 4.2 ± 0.05V, CCCV, 100mA deadline
Charging time; Standard charge 4hours/100mA deadline 
Quick charge: 2hours/100mA deadline (25 °C)
Standard discharge 2600mA 0.2C, 2.5V cut 
Maximum discharge current 6.8A
Continuous discharge 6.8A
Discharge cut-off voltage 2.5V 
The standard charge 1A
The fast charge 4A
Weight 45g
Size 64.9 x 18.3 
Use of the environment Charge 0 ~ 50 °C
Discharge -20 ~ 75 °C

Features
1.High energy density
2.High working voltage for single battery cells.
3.Pollution-free
4.Long cycle life
5.No memory effect
6.Capacity,resistance,Voltage,platform time consistency is good.
7.Good consistency.low self discharge.
8.Light weight,small size

Li-ion batte7.jpg
 
airplane-air-craft-shipping-around-260nw-135343412.jpg

Orders For UK delivery
Any order placed for a model with sound effects which will be delivered
to a UK location will be sent with the plug and play battery & speaker setup.




Orders Outside The UK / International Orders
Any order placed for a model with sound effects which will be
delivered
outside of the UK can not be sent with the 18650 2600mAh
Li-ion battery due to courier T&C's.
Due to this the battery setup will be different and you will need to fit
your own battery once you recive your order.

uk battery.png
international battery.png

International Orders

fsuk linear logo (jedi version with swip